PLEX86  x86- Virtual Machine (VM) Program
 CVS  |  Mailing List  |  Download  |  Newsgroups

BIOS does not recognise the DVDCD drive 279


Your Ad Here

Your Ad Here

BIOS does not recognise the DVDCD drive 280
AS a follow-up, I've tried several of your suggestion and also clearing the BIOS by repositioning the jumper and reset the BIOS...

Thanks Brian and all, this is as far as I've got to-date. The BIOS was succesfully updated and I have been able to install Windows 98 using the 98 floppy by typing ( D:setup) from the A: prompt. Windows 98 works fine on this installation and the DVD drive reads CD from it.

With the Windows 98 operating system installed, I have changed the 1st boot sequence to DVD and on a reboot, XP will pick up the DVD and start the installation before crashing part way through it. On the other hand.

If I remove the Windows 98 operating system by Fdisk and formating the hard drive and then try to install XP having set the 1st boot order to DVD, it does not start the XP installation disc and instead gives a message that the wrong disk is installed and to remove the disk and press enter.

I'm buttuming that as I've been able to install Windows 98 the system is in a reasonably workable condition. What I don't understand, is why BIOS will recognise the DVD drive and allow it to be set and saved, but will not pick it up when I reboot with a formatted hard drive. It does if Windows 98 is installed?



Your Ad Here

List | Previous | Next

BIOS does not recognise the DVDCD drive 280

Alt Computers from Newsgroups

The #1 Usenet Provider on the Internet

BIOS does not recognise the DVDCD drive 278