ATI Raedeon X600 Hangs the system

Hello,

I am having problems using an ATI Radeon X600 on RHEL4 U2. The ATI driver is not pre-built for the kernel version that I am using so I tried to build a kernel specific version and everytime I try to use the makeinstall.sh script to install the driver it comes back that there are unresolved symbols in the module.

Just wondering if anyone has gotten this to work. here is some more information about the machine hardware and the errors that I have received.

lspci -v output: 00:00.0 Host bridge: Intel Corporation 945G-P Memory Controller Hub (rev 02) Subsystem: Dell: Unknown device 01ad Flags: bus master, fast devsel, latency 0 Capabilities: e0 Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation 945G-P PCI Express Graphics Port (rev 02) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I-O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-feafffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: 88 #0d 0000 Capabilities: 80 Power Management version 2 Capabilities: 90 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: a0 Express Root Port (Slot+) IRQ 0 Capabilities: 100 Virtual Channel Capabilities: 140 Unknown (5)

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Capabilities: 40 Express Root Port (Slot+) IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: 90 #0d 0000 Capabilities: a0 Power Management version 2 Capabilities: 100 Virtual Channel Capabilities: 180 Unknown (5)

Hard disk data recovery. 366
Hi Brian, ... Using some backup program? Sad thing is the size of the file, more below. ... okay, if you try to mount hdb5, then ls, what? as root # mountdev...

Using suse 10.0 rpms on suse 9 369
Horacio Well, you can always install them. RPM has a lot of options to bypbutt its own securities and dependencies. It's just that the result is unpredictable to say the least...

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe700000-fe7fffff Capabilities: 40 Express Root Port (Slot+) IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: 90 #0d 0000 Capabilities: a0 Power Management version 2 Capabilities: 100 Virtual Channel Capabilities: 180 Unknown (5)

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 185 I-O ports at ff80 size=32

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 193 I-O ports at ff60 size=32

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 201 I-O ports at ff40 size=32

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 209 I-O ports at ff20 size=32

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 EHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 185 Memory at ffa80800 (32-bit, non-prefetchable) size=1K Capabilities: 50 Power Management version 2 Capabilities: 58 Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 Subtractive decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Capabilities: 50 #0d 0000

00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 209 I-O ports at ec00 size=256 I-O ports at e8c0 size=64 Memory at febffa00 (32-bit, non-prefetchable) size=512 Memory at febff900 (32-bit, non-prefetchable) size=256 Capabilities: 50 Power Management version 2

Using suse 10.0 rpms on suse 9 368
In comp.os.linux.misc, on Wed 08 February 2006 12:28, Horacio Yes there is, but you need to be sure you know what you are doing - especially as SUSE 9.0 is...

00:1f.0 ISA bridge: Intel Corporation 82801GB-GR (ICH7 Family) LPC Interface Bridge (rev 01) Flags: bus master, medium devsel, latency 0 Capabilities: e0 Vendor Specific Information

Hard disk data recovery. 364
Grant I was transferring about 17GB of files in two streams to a shared 160GB Hard drive (D drive or...

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a Master SecP PriP) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 168 plus 1 I-O ports at ffa0 size=16

00:1f.2 IDE interface: Intel Corporation 82801GB-GR-GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f Master SecP SecO PriP PriO) Subsystem: Dell: Unknown device 01ad Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 217 I-O ports at fe00 size=8 I-O ports at fe10 size=4 I-O ports at fe20 size=8 I-O ports at fe30 size=4 I-O ports at fea0 size=16 Capabilities: 70 Power Management version 2

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Dell: Unknown device 01ad Flags: medium devsel, IRQ 177 I-O ports at e8a0 size=32

01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B62 Radeon X600 (PCIE) (prog-if 00 VGA) Subsystem: ATI Technologies Inc: Unknown device 0f02 Flags: fast devsel, IRQ 168 plus 1 Memory at f0000000 (64-bit, prefetchable) size=128M Memory at fe9e0000 (64-bit, non-prefetchable) size=64K I-O ports at dc00 size=256 Expansion ROM at fea00000 disabled size=128K Capabilities: 50 Power Management version 2 Capabilities: 58 Express Endpoint IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit+ Queue=0-0 Enable- Capabilities: 100 Advanced Error Reporting

01:00.1 Display controller: ATI Technologies Inc Radeon X600(RV380) Subsystem: ATI Technologies Inc: Unknown device 0f03 Flags: bus master, fast devsel, latency 0 Memory at fe9f0000 (64-bit, non-prefetchable) size=64K Capabilities: 50 Power Management version 2 Capabilities: 58 Express Endpoint IRQ 0

02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) Subsystem: Dell: Unknown device 01ad Flags: bus master, fast devsel, latency 0, IRQ 168 plus 1 Memory at fe8f0000 (64-bit, non-prefetchable) size=64K Capabilities: 48 Power Management version 2 Capabilities: 50 Vital Product Data Capabilities: 58 Message Signalled Interrupts: 64bit+ Queue=0-3 Enable- Capabilities: d0 Express Endpoint IRQ 0 Capabilities: 100 Advanced Error Reporting Capabilities: 13c Virtual Channel

Build the module and install:

ATI module generator V 2.0 ========================== initializing... cleaning... patching 'highmem.h'... buttuming new VMA API since we do have kernel 2.6.x... doing Makefile based build for kernel 2.6.x and higher make -Clib-modules-2.6.9-22.ELsmp-build SUBDIRS=-lib-modules-fglrx-buildmod-2.6.x modules make1: Entering directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' Building modules, stage 2. MODPOST make1: Leaving directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' build succeeded with return value 0 compiling fglrxagp.ko module make -Clib-modules-2.6.9-22.ELsmp-build SUBDIRS=-lib-modules-fglrx-buildmod-fireglagpgart modules make1: Entering directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' Building modules, stage 2. MODPOST make1: Leaving directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' AGPGART build succeeded with return value 0 finished compiling for fglrxagp duplicating results into driver repository... done. ============================== You must change your working directory tolib-modules-fglrx and then call .-makeinstall.sh in order to install the built module. ==============================lib-modules-fglrx buildmod fglrx.2.4.20-28.9bigmem.o fglrx.2.4.9-e.35enterprise.o fglrx.ko fglrx.2.4.18-17.7.x.o fglrx.2.4.20-28.9.o fglrx.2.4.9-e.35.o make.2.6.9-22.ELsmp.log fglrx.2.4.18-17.8.0.o fglrx.2.4.20-28.9smp.o fglrx.2.4.9-e.35smp.o makeinstall.sh fglrx.2.4.20-28.8bigmem.o fglrx.2.4.20-8bigmem.o fglrx.2.6.9-22.ELsmp.ko fglrx.2.4.20-28.8.o fglrx.2.4.20-8.o fglrxagp.2.6.9-22.ELsmp.ko fglrx.2.4.20-28.8smp.o fglrx.2.4.20-8smp.o fglrxagp.ko - creating symlink - recreating module dependency list - trying a sample load of the kernel modules bane: Error inserting fglrx (-lib-modules-2.6.9-22.ELsmp-kernel-drivers-char-drm-fglrx.ko): Unknown symbol in module, or unknown parameter (see dmesg) failed.

dmesg output: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack

System.map seems to have the symbols. c011a497 T dommtrack c012009e t mminit c01201a8 T mmalloc c01202bf T mmrelease c014d446 T handlemmfault c023f8a3 t idemminb c023f8aa t idemminw c023f8b1 t idemminsw c023f8c7 t idemminl c023f8ca t idemminsl c023f8de t idemmoutb c023f8e1 t idemmoutbsync c023f8e4 t idemmoutw c023f8eb t idemmoutsw c023f901 t idemmoutl c023f904 t idemmoutsl c02ce353 t packetmmopen c02ce371 t packetmmclose c030d328 r ksymtabmmtrackingstruct c030d330 r ksymtabdommtrack c030fecc r kcrctabmmtrackingstruct c030fed0 r kcrctabdommtrack c0310b46 r kstrtabmmtrackingstruct c0310b59 r kstrtabdommtrack c040c8c0 B mmtrackingstruct c040d6ec B mmcachep

Any help would be appreciated.

Regards, Stephen Perras

List | Previous | Next

Hard disk data recovery. 364

Linux groups from Newsgroups

The #1 Usenet Provider on the Internet

Uses of The 4th Dimension New Discovery by The Human Race! 362

PLEX86 x86- Virtual Machine (VM) Program


	Plex86 \| CVS \| Mailing List \| Download \| Linux \| Newsgroups

		ATI Raedeon X600 Hangs the system Hello, I am having problems using an ATI Radeon X600 on RHEL4 U2. The ATI driver is not pre-built for the kernel version that I am using so I tried to build a kernel specific version and everytime I try to use the makeinstall.sh script to install the driver it comes back that there are unresolved symbols in the module. Just wondering if anyone has gotten this to work. here is some more information about the machine hardware and the errors that I have received. lspci -v output: 00:00.0 Host bridge: Intel Corporation 945G-P Memory Controller Hub (rev 02) Subsystem: Dell: Unknown device 01ad Flags: bus master, fast devsel, latency 0 Capabilities: e0 Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation 945G-P PCI Express Graphics Port (rev 02) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I-O behind bridge: 0000d000-0000dfff Memory behind bridge: fe900000-feafffff Prefetchable memory behind bridge: 00000000f0000000-00000000f7f00000 Capabilities: 88 #0d 0000 Capabilities: 80 Power Management version 2 Capabilities: 90 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: a0 Express Root Port (Slot+) IRQ 0 Capabilities: 100 Virtual Channel Capabilities: 140 Unknown (5) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe800000-fe8fffff Capabilities: 40 Express Root Port (Slot+) IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: 90 #0d 0000 Capabilities: a0 Power Management version 2 Capabilities: 100 Virtual Channel Capabilities: 180 Unknown (5) Hard disk data recovery. 366 Hi Brian, ... Using some backup program? Sad thing is the size of the file, more below. ... okay, if you try to mount hdb5, then ls, what? as root # mountdev... Using suse 10.0 rpms on suse 9 369 Horacio Well, you can always install them. RPM has a lot of options to bypbutt its own securities and dependencies. It's just that the result is unpredictable to say the least... 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 Normal decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe700000-fe7fffff Capabilities: 40 Express Root Port (Slot+) IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit- Queue=0-0 Enable- Capabilities: 90 #0d 0000 Capabilities: a0 Power Management version 2 Capabilities: 100 Virtual Channel Capabilities: 180 Unknown (5) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 185 I-O ports at ff80 size=32 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 193 I-O ports at ff60 size=32 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 201 I-O ports at ff40 size=32 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 UHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 209 I-O ports at ff20 size=32 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 EHCI) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 185 Memory at ffa80800 (32-bit, non-prefetchable) size=1K Capabilities: 50 Power Management version 2 Capabilities: 58 Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 Subtractive decode) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Capabilities: 50 #0d 0000 00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 209 I-O ports at ec00 size=256 I-O ports at e8c0 size=64 Memory at febffa00 (32-bit, non-prefetchable) size=512 Memory at febff900 (32-bit, non-prefetchable) size=256 Capabilities: 50 Power Management version 2 Using suse 10.0 rpms on suse 9 368 In comp.os.linux.misc, on Wed 08 February 2006 12:28, Horacio Yes there is, but you need to be sure you know what you are doing - especially as SUSE 9.0 is... 00:1f.0 ISA bridge: Intel Corporation 82801GB-GR (ICH7 Family) LPC Interface Bridge (rev 01) Flags: bus master, medium devsel, latency 0 Capabilities: e0 Vendor Specific Information Hard disk data recovery. 364 Grant I was transferring about 17GB of files in two streams to a shared 160GB Hard drive (D drive or... 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a Master SecP PriP) Subsystem: Dell: Unknown device 01ad Flags: bus master, medium devsel, latency 0, IRQ 168 plus 1 I-O ports at ffa0 size=16 00:1f.2 IDE interface: Intel Corporation 82801GB-GR-GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f Master SecP SecO PriP PriO) Subsystem: Dell: Unknown device 01ad Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 217 I-O ports at fe00 size=8 I-O ports at fe10 size=4 I-O ports at fe20 size=8 I-O ports at fe30 size=4 I-O ports at fea0 size=16 Capabilities: 70 Power Management version 2 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Dell: Unknown device 01ad Flags: medium devsel, IRQ 177 I-O ports at e8a0 size=32 01:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B62 Radeon X600 (PCIE) (prog-if 00 VGA) Subsystem: ATI Technologies Inc: Unknown device 0f02 Flags: fast devsel, IRQ 168 plus 1 Memory at f0000000 (64-bit, prefetchable) size=128M Memory at fe9e0000 (64-bit, non-prefetchable) size=64K I-O ports at dc00 size=256 Expansion ROM at fea00000 disabled size=128K Capabilities: 50 Power Management version 2 Capabilities: 58 Express Endpoint IRQ 0 Capabilities: 80 Message Signalled Interrupts: 64bit+ Queue=0-0 Enable- Capabilities: 100 Advanced Error Reporting 01:00.1 Display controller: ATI Technologies Inc Radeon X600(RV380) Subsystem: ATI Technologies Inc: Unknown device 0f03 Flags: bus master, fast devsel, latency 0 Memory at fe9f0000 (64-bit, non-prefetchable) size=64K Capabilities: 50 Power Management version 2 Capabilities: 58 Express Endpoint IRQ 0 02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) Subsystem: Dell: Unknown device 01ad Flags: bus master, fast devsel, latency 0, IRQ 168 plus 1 Memory at fe8f0000 (64-bit, non-prefetchable) size=64K Capabilities: 48 Power Management version 2 Capabilities: 50 Vital Product Data Capabilities: 58 Message Signalled Interrupts: 64bit+ Queue=0-3 Enable- Capabilities: d0 Express Endpoint IRQ 0 Capabilities: 100 Advanced Error Reporting Capabilities: 13c Virtual Channel Build the module and install: ATI module generator V 2.0 ========================== initializing... cleaning... patching 'highmem.h'... buttuming new VMA API since we do have kernel 2.6.x... doing Makefile based build for kernel 2.6.x and higher make -Clib-modules-2.6.9-22.ELsmp-build SUBDIRS=-lib-modules-fglrx-buildmod-2.6.x modules make1: Entering directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' Building modules, stage 2. MODPOST make1: Leaving directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' build succeeded with return value 0 compiling fglrxagp.ko module make -Clib-modules-2.6.9-22.ELsmp-build SUBDIRS=-lib-modules-fglrx-buildmod-fireglagpgart modules make1: Entering directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' Building modules, stage 2. MODPOST make1: Leaving directory `-usr-src-kernels-2.6.9-22.EL-smp-i686' AGPGART build succeeded with return value 0 finished compiling for fglrxagp duplicating results into driver repository... done. ============================== You must change your working directory tolib-modules-fglrx and then call .-makeinstall.sh in order to install the built module. ==============================lib-modules-fglrx buildmod fglrx.2.4.20-28.9bigmem.o fglrx.2.4.9-e.35enterprise.o fglrx.ko fglrx.2.4.18-17.7.x.o fglrx.2.4.20-28.9.o fglrx.2.4.9-e.35.o make.2.6.9-22.ELsmp.log fglrx.2.4.18-17.8.0.o fglrx.2.4.20-28.9smp.o fglrx.2.4.9-e.35smp.o makeinstall.sh fglrx.2.4.20-28.8bigmem.o fglrx.2.4.20-8bigmem.o fglrx.2.6.9-22.ELsmp.ko fglrx.2.4.20-28.8.o fglrx.2.4.20-8.o fglrxagp.2.6.9-22.ELsmp.ko fglrx.2.4.20-28.8smp.o fglrx.2.4.20-8smp.o fglrxagp.ko - creating symlink - recreating module dependency list - trying a sample load of the kernel modules bane: Error inserting fglrx (-lib-modules-2.6.9-22.ELsmp-kernel-drivers-char-drm-fglrx.ko): Unknown symbol in module, or unknown parameter (see dmesg) failed. dmesg output: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack fglrx: Unknown symbol mmtrackingstruct fglrx: Unknown symbol dommtrack System.map seems to have the symbols. c011a497 T dommtrack c012009e t mminit c01201a8 T mmalloc c01202bf T mmrelease c014d446 T handlemmfault c023f8a3 t idemminb c023f8aa t idemminw c023f8b1 t idemminsw c023f8c7 t idemminl c023f8ca t idemminsl c023f8de t idemmoutb c023f8e1 t idemmoutbsync c023f8e4 t idemmoutw c023f8eb t idemmoutsw c023f901 t idemmoutl c023f904 t idemmoutsl c02ce353 t packetmmopen c02ce371 t packetmmclose c030d328 r ksymtabmmtrackingstruct c030d330 r ksymtabdommtrack c030fecc r kcrctabmmtrackingstruct c030fed0 r kcrctabdommtrack c0310b46 r kstrtabmmtrackingstruct c0310b59 r kstrtabdommtrack c040c8c0 B mmtrackingstruct c040d6ec B mmcachep Any help would be appreciated. Regards, Stephen Perras List \| Previous \| Next



		Hard disk data recovery. 364 Linux groups from Newsgroups The #1 Usenet Provider on the Internet Uses of The 4th Dimension New Discovery by The Human Race! 362