Disk problems on Debian 3.0r1
On 7 Feb 2005 18:23:17 GMT, Davide Bianchi staggered into the Black Sun and said: The OP (Original Poster)'s problem is that his tape was written a long time ago...
Hi,
HI First let me prefix this by admitting I am a newbie to RPM and Linux (I am running Suse). I am trying to build a...
I have some disk problems on Debia. Below is my "kern.log" file:
I cannot find any centralized database for hardware info in the open source community. More...
Feb 7 08:05:23 narcea kernel: CSLIP: code copyright 1989 Regents of the University of California Feb 7 08:05:23 narcea kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). Feb 7 08:05:23 narcea kernel: SLIP linefill-keepalive option. Feb 7 08:05:25 narcea kernel: parport0: PC-style at 0x378 (0x778) SPP,ECP,ECPPS2 Feb 7 08:05:25 narcea kernel: parport0: detected irq 7; use procfs to enable interrupt-driven operation. Feb 7 08:05:25 narcea kernel: lp0: using parport0 (polling). Feb 7 08:10:01 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:10:01 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:10:02 narcea kernel: ide0: reset: success Feb 7 08:16:17 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:16:17 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:16:18 narcea kernel: ide0: reset: success Feb 7 08:16:52 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:16:52 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:16:53 narcea kernel: ide0: reset: success Feb 7 08:32:18 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:32:18 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:32:18 narcea kernel: ide0: reset: success Feb 7 08:42:03 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:42:03 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:42:03 narcea kernel: ide0: reset: success Feb 7 08:48:08 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:48:08 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:48:08 narcea kernel: ide0: reset: success Feb 7 08:54:38 narcea kernel: hda: status error: status=0xd0 { Busy } Feb 7 08:54:38 narcea kernel: hda: no DRQ after issuing WRITE Feb 7 08:54:38 narcea kernel: ide0: reset: success Feb 7 09:18:50 narcea kernel: hda: status error: status=0xd0 { Busy }
I believe that the problems are caused for "CSLIP" . What is CSLIP useful for ?. How can I desactivate it ?
Thanks in advance, Jose Luis.
Central hardware identification database
Linux groups from Newsgroups