IE1394 DV capture problem in kino 1551

Now it works. I believe this Conceptronic PCI Card isn't very reliable. I probe to changes the port where the cable were attach. The card has three ports. One of them, just the middle one, works if you remove the eth1394 module:

- Start the system:

$ dmesg grep 1394 ieee1394: Initialized config rom entry `ip1394' ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=21 MMIO=feafb800-feafbfff Max Packet=2048 ieee1394: Host added: ID:BUS0-00:1023 GUID001106000000f6e5 ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)

- Turn on camcorder: $ dmesg grep 1394 ieee1394: Initialized config rom entry `ip1394' ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=21 MMIO=feafb800-feafbfff Max Packet=2048 ieee1394: Host added: ID:BUS0-00:1023 GUID001106000000f6e5 ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ieee1394: Current remote IRM is not 1394a-2000 compliant, resetting... ieee1394: Node added: ID:BUS0-00:1023 GUID00804580b155a484 ieee1394: raw1394:dev-raw1394 device initialized

- Trying capture, no success $ dvgrab 0.00 MB 0 frames Capture Stopped Error: no DV

- Remove eth1394 # lsmod grep 1394 raw1394 24524 0 dv1394 17196 0 eth1394 17000 0 ohci1394 30788 1 dv1394 ieee1394 292056 4 raw1394,dv1394,eth1394,ohci1394 # rmmod eth1394

- Now success! $ dvgrab Capture Started "dvgrab-001.avi": 27.05 MB 187 frames timecode 00:02:40.04 date 2006.05.14 12:54:49 Capture Stopped

Thanks a lot for your help.