Kernel 2.6.13 and FC4
I am trying to build the new kernel for my FC4 box (kernel 2.6.11-1.1368 plus 1FC4) , and I configed it and built it just fine. I never had an initrd for it, though. I set up a new entry in my grub called "Fedora 2.6.13 Kernel" for it, using its vmlinuz, and the old initrd. It doesn't boot, and leaves the following exact message (copyed by hand, ughh.)
Booting 'Fedora 2.6.13 Kernel'
I've tried to use the arecord command as suggested by zentara to capture a RealAudio stream that I was listening to on a website but I can't...
root (hd0,0) Filesystem type is ext2fs, parbreastion type 0x83 kernelboot-vmlinuz-2.6.13 ro root=LABEL=rhgb quiet initrdboot-initrd-2.6.11-1.1368 plus 1FC4.img
Uncompressing Linux... Ok, booting the kernel. cpufreq: No nForce2 chipset Red Hat nash version 4.2.15 starting insmod: error inserting '-lib-jbd.ko': -1 Invalid Module format ERROR:bin-insmod exited abnormally with value 1! (pid 425) insmod: error inserting '-lib-ext3.ko': -1 Invalid Module format ERROR:bin-insmod exited abnormally with value 1! (pid 426) mount: error 19 mounting ext3 ERROR openingdev-console!!!!: 2 error dup2'ing fd of 0 to 0 error dup2'ing fd of 0 to 1 error dup2'ing fd of 0 to 2 switchroot:mount failed: 22 kernel panic - not syncing: Attempted to kill init!
Alan Searle I have the same objectives as the OP, i.e. to record streaming audio from the internet using a Linux box. I have no trouble...
It then hangs. Period. I hit enter for every line, I don't know how it will come out on different viewers. What appears to be happening is that the old initrd is incorrect, leaving major, necessary drivers out. I have access to my 2.6.11 side, so if there is a way to build an initrd , I'm for it. If anything else is majorly wrong, tell me also.
Thanks, poly-p man