Raid 1 in ReadOnly mode, cant switch to RW
I have a server with 2 SATA disks which are a split into 3 parbreastions each, and then RAID-1 into md0,md1,md2
md2boot md0 md1 swap
md0 (-) is in ro mode all of a sudden and i cant remount into rw. I tried blockdev --setrwdev-md0 as well as the individial disksdev-sdc3 anddev-sdb3
hdparm says:dev-md0: readonly = 0 (off) geometry = 49280-2-4, sectors = 155059200, start = 0
Personalities : raid1 md2 : active raid1 sdb11 sda10 104192 blocks 2-2 UU
md1 : active raid1 sdb21 sda20 513792 blocks 2-2 UU
md0 : active raid1 sdb31 sda30 77529600 blocks 2-2 UU
bigbob here is my CUPS file. ill probably get roasted for posting it as it is nothing special., but it works. make...
dev-md0 on type ext3 (rw) none onproc type proc (rw) none onsys type sysfs (rw) none ondev-pts type devpts (rw,gid=5,mode=620) usbdevfs onproc-bus-usb type usbdevfs (rw)dev-md2 onboot type ext3 (rw) none ondev-shm type tmpfs (rw)
mount: block devicedev-md0 is write-protected, mounting read-only mount: block devicedev-md0 is write-protected, mounting read-onlydev-md0 on type ext3 (ro)
ext3abort called. EXT3-fs abort (device md0): ext3remount: Abort forced by user ext3abort called. EXT3-fs abort (device md0): ext3remount: Abort forced by user ext3abort called. EXT3-fs abort (device md0): ext3remount: Abort forced by user ext3abort called. EXT3-fs abort (device md0): ext3remount: Abort forced by user ext3abort called. EXT3-fs abort (device md0): ext3remount: Abort forced by user
Some years ago I visited California, and drove from Sacramento to San Francisco on a holiday weekend. It was interesting... though I'd been warned by locals before...
BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 In a way it is, because it requires additional modification (writes...
any ideas? I dont want to reboot.
driving in the rightmost lane is very dangerous
Linux groups from Newsgroups