distro recommendation 2722
Dances With Crows That's the only reference to ide in lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM-PM-GMS-910GML Express Proces sor to DRAM Controller (rev 03) 00:01.0...
Dances With Crows You're onto something. But for some reason enabling dma does not work:
Running as root:
sbin-hdparmdev-hdc
dev-hdc: IOsupport = 0 (default 16-bit) unmaskirq = 0 (off) usingdma = 0 (off) keepsettings = 0 (off) readonly = 0 (off) readahead = 256 (on) HDIOGETGEO failed: Inappropriate ioctl for device
Hello, when I plug in my dvb-t box I get this syslog messages: Oct 14 11:05:15 horus usb 1-3: new...
sbin-hdparm -d1dev-hdc
dev-hdc: setting usingdma to 1 (on) HDIOSETDMA failed: Operation not permitted usingdma = 0 (off)
I'm running 2.6.17-1.2187FC5 that ati driver wanted.
from dmesg:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: buttuming 33MHz system bus speed for PIO modes; override with idebus=xx ide0: I-O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe Probing IDE interface ide1... hdc: HL-DT-STCD-RW-DVD-ROM GCC-4244N, ATAPI CD-DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X DVD-ROM CD-R-RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20
...
SCSI subsystem initialized libata version 1.20 loaded. atapiix 0000:00:1f.2: version 1.05 atapiix 0000:00:1f.2: MAP P0 P2 IDE IDE ata: 0x170 IDE port busy PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA-133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14 ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f468 plus 1 86:3e48 87:4023 88:203f ata1: dev 0 ATA-6, max UDMA-100, 117210240 sectors: LBA48 ata1(0): applying bridge limits ata1: dev 0 configured for UDMA-100 scsi0 : atapiix Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sd 0:0:0:0: Attached scsi disk sda
cpufreqd is not running
The only usb problem is with the Turtle Beach Roadie. Someone mentioned earlier that the card can do 48khz only. I think that should be fine at least for dvd audio tracks. I might live without aplay and mpg123-321.
Someone at TB must've had a kick out of naming that one.
Got the gentoo livecd burned but need to sort out the cooling for the new system. According to the hw monitor in bios cpu temp gets above 68 plus 1C and system temp above 55c after running memtest86 for a few hours. Then the box shuts off. Silverstone NT01 cooler goes back where I bought it from :-(
findproc -name i2c does not show any files I could poke in to see cpu-system temperatures. Is there some module that needs to be insmoded?
Linux groups from Newsgroups